1400-2800kw Condensing Heat Exchanger

Megamodul Series 1400-2800kw Condensing Heat Exchanger

1.Product Introduction

The design capacity about megamodul series aluminium casting domestic condensing heat exchanger is from 1400KW to 2800KW. Aluminium casting commercial Condensing Heat Exchanger, consists of Left, Middle and Right Sections, is the main body component of the Condensing Boiler. The megamodul series 1400kw to 2800kw condensing heat exchanger breaks through the high difficulty of manufacturing with customized equipment, and applicable to heating and hot water supply for a large area such as hotel, school, hospital, etc, and is a new eco-friendly and energy-saving product promoted by various governments to replace non-condensing, coal, oil and electric water boilers.

2.Product Parameter (Specification)

Megamodul Heat Exchanger
Type	9-L	11-L	13-L	Unit
Nominal Input	1400	1800	2200	kw
Efficiency Load 30%	107	107	107.5	%
Operating Pressure	6	6	6	bar
W=781*H=1120*L=	1663	1907	2151	mm
Flue connectionφ	400	400	400	mm
Weight	795	968	1141
Certificate	CE/RoHs/ASME
Material	EN1706/AC43000

3.Product Feature And Application

Based upon the revolutionary design of his predecessors the‘the Intermodul Maxi’ we developed ‘The Intermodul Mega’2800kw condensing heat exchanger. The biggest alucast condensing boiler available on the market. Our innovative manifolds (Tichelmann system) and the sump are prefab integrated in every single casting section. This means less components and higher reliability. The flow and return pipe exit the Intermodul boiler at the backside. Our patented heat exchanger consists of a front-, back-, and mid-section casting. Industrial capacities up to 2200 kW can be reached. Our Intermodul MEGA system gives our customers the possibility to assemble ultra high capacity tailor made solutions.

4.Product Details

Benefits
For industrial use (XXL).
Best price / quality ratio in the market.
Low hydraulic pressure drop because of parallel water flow.
Manifolds (Tichelmann system) and sump integrated in
the casting sections.
Low pneumatic resistance.
Combustion chamber completely water cooled,
no refractories needed.
High capacity on a small footprint. Just 3.2 m2 floor area.
Available as heat cell only or as a complete tested boiler under private label.
CE approved.
State of the Art Worgas cylindrical burner inside.
Tailor made capacity.
Easy cleaning and maintenance.
Global patented design. (Tichelmann system)

DETAILS:

Typical quality control:

Certificate: